Create Stretched Tier-0 Gateway in VMware NSX-T Federation

Close Editing

1. Configure segments for the Tier-0 Uplink
2. Create a Stretched Tier-0 GW
3. Connect the Stretched Tier-1 GW to the Stretched Tier-0 GW
4. Test end to end connectivity

ADD Interface

Click Set for the primary location

Repeat process but for your secondary site

Save

Set Mode to Secondary

Save

This proves the ability to ping from outside the NSX-T network to virtual machines inside the NSX-T network

This proves the ability to ping from outside the NSX-T network to virtual machines inside the NSX-T network

Enter the remote AS number

Select your secondary location and the VLAN Transport Zone for your second site

Provide a name that indicates this is a VLAN from the secondary site and that it is for stretching

Repeat for secondary site too

Enter a name for this gateway

Then select the edge node that supports the RTEP